Well, I started with this 1/2 decent hardtop, it needed a good rubbing down as it was dull, blotchy & battle scarred. After masking it was sprayed with a bond coat to even it out, then 5 coats of red, it needs this many as I,m rubbish at spraying so it needs a lot of flatting back & polishing. 

While I was doing the top I'd also bought a scoop, which I was thinking of putting on the front as a vent, orthe back & fitting high level brake lights - yet to decide. 

Here it is fitted. Now it needs a new rear screen& some new seals. wip!! 

Heres the new rear window fitted, I can see through this! At the same time I ordered a new body to H/top seal, & here it is fitted. 

 

Next I fitted a new front h/top to screen rubber seal, needs the inner spraying but will do this when the new lining is fitted (no paint left at the moment) 

Decided to fit the scoop to the hard top facing rearwards, put a red 14 led brake light inside. Drilled a hole through (not too happy about that!) & ran a wire under the roof lining  and down the window seal. 

 
Make a Free Website with Yola.